| Design speed: 200m/min | Normal work speed: 160-180m/min |
| No. | Machine name | Qty | Remarks |
| 1 | Mill roll stand | 3 | RS-1500-1800 type, Base paper lifting, clamping, loosening, left shift, right shift are hydraulic control, multiple brakes, sawtooth chuck, the maximum paper width is 1850mm, the maximum paper diameter 1500mm.Hydraulic valve made in Tianyuan . |
| 2 | Hydraulic railing and pulley | 6 | 6m railing with pulley
16# channel steel |
| 3 | Pre-heater | 1 | MH-900T-1800 type, preheating cylinder diameter of 900mm, adjust the electric preheating area, water valve for the Shanghai brand, with safety protection cover |
| 4 | Cassette Single facer | 1 | HSF-380S-1800 Cassette type, tunsteng carbide roller 380mm, Origin : RMM
The main bearing adopts NSK brand
The coating section adopts independent transmission
Adjusts the glue quantity according to PLC automatic control, and the whole can be moved. Glue groove stainless steel,
Adjust the glue quantity automatically according to the speed. |
| | Extra flute group | 1 | Corrugating roll diameter 380mm,E flute |
| | Battery pulley | 1 | Battery pulley and table 1set |
| 5 | Pre-conditioner | 1 | MH-900T-1800 type, preheating cylinder diameter of 900mm, adjust the electric preheating area, water valve for the Shanghai brand, with safety protection cover |
| 6 | Bridge conveyor | 1 | ST-1800 bridge. One sets of paper pulling parts, electric deviation correction. According to the speed adjustment of single machine, keep synchronization. |
| 7 | Double pre-heater | 1 | MH-900T-1800 type, preheating cylinder diameter of 900mm, adjust the electric preheating area, water valve for the Shanghai brand, with safety protection cover |
| 8 | Gluing machine | 1 | GA-318D-1800 type of 318mm, variable frequency motor, display quantity of cement, the main bearings imported products. |
| 9 | Double facer | 1 | DF-745-1800 type, Large worm gear box, automatic deviation correction, frequency conversion motor, wallboard for casting, drive roller hanging glue, 600mm * 18 block heating plate, hydraulic lifting. heating plate plated chrome. Pre-paint . |
| 10 | Main drive | 1 | Diameter 745mm
Rubber roller
Independent reducer box, gimbal driving. |
| 11 | NC slitter | 1 | SS-200P-1800, For a single time less than 8 seconds, 5 knife 8 line, zero line |
| 12 | NC cutter | 1 | NC-200N-1800, Paper length is 9999mm. The computer can store multiple orders, the man-machine interface is separated, the display shows production information, and the computer controls the automatic change list without stopping the machine. Paper cutting accuracy + 1mm. Cutter shaft of 228mm spiral knife in Taiwan.
Color mark recognition system |
| 14 | Computerized stacking machine | 1 | CS-200P-1800,Max stack length: 450-3200mm,
Max stack height: 1600mm(stack height should not be higher 3 times of paperboard height) |
| 15 | Glue making system | 1 | main pot 1 set, carrier pot 1 set, and storage pot 2set, glue station pump, single facer glue pump and gluing machine glue pump.Total 7pumps
Circle supply glue, pipeline provided by customer |
| 16 | Pneumatic system | 1 | Separator and 1 set air storage Jar and air pump.
Pipes provided by customer. |
| 17 | Electric system | 1 | Adopt OMRON Schneider and other European brands.
Including wires from switch board to main motor. |
| 18 | Steam system | 1 | pipes above valves provided by customers. |
| Design speed | 200m/min |
| Normal work speed | 160-180m/min |
| Manufacture width | 1800mm |
| Production Line Length | About 70meters (Exact length basis on groundwork drawing) |
| Note: The roll paper which is used to test the production speed should meet following requirements | *Grade: Min. B * Moisture content: 11% ± 1%
*Face paper: 100~150g/m2 * Liner paper: 100~150g/m2
*Corrugated paper: 105- 180g/m2 |
| Flute profiles | A,B,C,E flute(as per clients request) |
| Steam requirements | Steam quantity: 1800－2000Kg/Hr Max. pressure: 1.6Mpa
Normal pressure: 0.8－1.25MPa |
| Voltage | 380V 50Hz three-phase, or four phase |
| Equipment Direction | Left or Right transmission will be according to client`s requirements |
| equipment total power | about 260 kW, equipment commonly used power: 200 kw |
